![]() You can use also TFTP server like tftp32. ![]() Flashimage compressed_image_file_name or es: flashimage 192.168.1.100:firmware.bin or es: flashimage firmware.bin That's all, the device will automatically reboot and openwrt will be there Using dnsmasq: dnsmasq -d -enable-tftp -tftp-root=`pwd` -p 0 #fron the directory where firmware is previously downloaded where the 192.168.1.100 is your server tftp After the flashing of new firmware the router will reboot. If you configure (with command c) the host ip address you can avoid it in the flashimage argument.ĬFE>flashimage eg. I suggest to rename the firmware file downloaded as firmware.bin Now you have to use the flashimage command to load the openwrt image, please don't use the f command. Put the chosen image in the right place (see your tftp server configuration), and go to the CFE prompt. Skip the jffs2 with 64k erase block as the flash use 128k block, anyway using 64k should not give much problem, just some wasted space and some errors messages. To start as novice I sugegst to use squasfs firmwares. More powerfull but you can destroy system files. You cannot destroy importan file jffs2 is a file system completly writable. ![]() Vacanze Di Natale 2000 Film Completo Dailymotion.
0 Comments
Leave a Reply. |